Call Us 083 266 5638

Welcome to Suzerain (Pty) Ltd Concrete Paver Moulds!

Slate Tile Mould 320mm

Tile Casting Mould 320mm X 320mm x 18mm.

Availability: In stock


We will send this product in 2 days.

Call us now for more info 083 266 5638.

Return unused items within 14 days for a full refund.

Order and buy this product online and we will send it to Durban, Cape Town, Johannesburg, Pretoria, Gauteng, Port Elizabeth, or anywhere in South Africa or the world.


Our Tile Mould is used for casting rectangular slate finish Tiles with a wet concrete mix.
10 Mould Castings per m²
1 Cavity
Cladding Size = 320mm X 320mm x 18mm

Please view the video below for more information about our tile mould. 

320mm x 320mm x 18mm thick slate tile mould. Can be used on the floor if placed on an existing floor slab, or as a wall tile. Due to the nominal thickness, the cast tile can not be used directly on the ground like other stones that are thicker. Should extensions be necessary or required at a later stage, more tiles can easily be made, eliminating the common problem of discontinued tiles.

Tile Mould Instructions

  • Coat entire mould with a thin layer of release agent (especially the corners and vertical sides).
  • Cast mould to the brim with concrete (wet mix but not too wet which will cause excessive shrinkage).
  • Mix should be 1:4 (cement : river sand works well. However, if you add small stones (6-9mm) this improves the strength of the tile.
  • Keep wet while setting (important as the tile is only 18mm thick and water is used up quite readily.
  • When concrete has set (leave overnight) invert and de-mould.
  • To cure your tiles, the best is to place the tiles in a basin of water for 4 to 5 days

For general information about our moulds please view the video below:

Slate Tile Mould 320mm 0 out of 1 5 based on ratings. user reviews.